Bond-it Indian Stone Sealer: 5ltr

Bond-it Indian Stone Sealer: 5ltr

Bond It Invisible Indian Sandstone Sealer acts as an invisible seal to paths, patios and driveways and provides long term resistance against staining and algae growth.

Bond it natural finish Indian sand stone is a solvent free advanced Fluoro polymer based formulation (F.P. multiple carbon–fluorine bonds having greater resistance to acids, bases, and solvents) used to seal and protect patios particularly for high quality natural stone, Bond it Indian sandstone sealer gives a high level of protection against water and oil penetration due to the Fluoro Polymer.

The application of this sealer can be done in one single coat and is suitable to use with most forms of natural stone.

Features & Benefits

• Specifically designed for: Porous surfaces such as natural stone and Indian sandstone
  
• Suitable for: High levels of UV radiation
  
• Resistance: Stain resistant, with improved water and oil resistance
  
• Helps prevent: Fungal green and moss growth
  
• Curing Times: One coat application with a fast curing, walk on after 3 to 4 hours depending on atmospheric conditions
  
• Odour: Bond it Indian sandstone sealer has a very low odour level
  
• Ideal for use with: Indian sandstone, sandstone, York stone, Limestone and other forms of natural stone
  
• Coverage: The sealer will cover approximately  4 to 8 meters square per litre.
• After sealing: Provides an easy clean surface
  
• Approximate Coverage: 4 to 8 meters square per litre

Key Feature

Protects patios, natural stone from water ingress from oil stains, particularly effective for protecting patios from fat spills and splashes from barbecues.
Indian stone sealer does not affect the colour or appearance of your patio and gives durable highly effective protection.

Preparation

1. Remove organic growth lichens and other dirt and debris etc
   
2. For best results use Bond It Patio Blaster refer to the technical data sheet
   
3. Wash all debris away and ensure the surface is dry and free from oil, grease, dust and loose material that may hinder adhesion

Usage

1. Do all the surface preparation first as listed above
   
2. Ready to use, and does not require diluting
   
3. We advise that you test this product on a small inconspicuous area prior to use to check compatibility
   
4. Shake can thoroughly ensuring the product is well mixed
   
5. Ensure that the surface is completely dry prior to use
   
6. Apply a single coat using either a brush, roller or squeegee
   
7. ensuring no pooling or ponding occurs
   
8. Allow 3 to 4 hours drying time before trafficking the area colder humid conditions will slow drying times
   

Buyer Notes

Technical Datasheet