Azpects EASYJoint Paving Compound: 12.5kg
Azpects EasyJoint Paving Compound
EASYJoint is the UK’s top selling paving joint compound, favoured by professionals and DIY installers all around the world. Making hard landscaping even easier because the product is best installed in wet conditions; rain or shine, it goes in fine. Suitable for all types of paving material, this easy-to-use product is strong enough to resist the elements and stand the test of time, making it much more effective than traditional jointing methods.
This EASY Joint compound is a very quick, effective, and aesthetically pleasing way to fill joints between paving. Easy to apply - simply soak the paving with water before commencing and then simultaneously use the brush in patio grout and wash the jointing compound into the joints, letting the water take the strain.
The result of using EASY Joint, to joint your paving, will be a paving gap that is filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods.
We stock all of the easy joint colours including:
- Easy Joint Basalt
- Easy Joint Stone Grey
- Easy Joint Mushroom
- Easy Joint Buff Sand
Features & Benefits:
- Can be used on natural stone or concrete flags.
- Creates a strong joint that will resist the elements and stand the test of time.
- Better than traditional jointing methods.
- All weather jointing compound.
- When used correctly and the instructions are followed there will be no staining and framing to the paving.
- Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water.
- Environmentally friendly product.
- This sweep in compound is 10 to 20 times faster than conventional mortar based jointing methods.
- Gap must be at least 3mm wide and 25mm deep.
- Colour: Buff Sand, Mushroom, Slate Grey, Basalt.
- Brand: Azpects
- Size: 12.5g.
Can I use a power washer to clean the paving and joints?
Yes, you can clean our paving joints with a pressure washer but it must be done cautiously and after the EASY Joint sweep in sand has set hard. We recommend leaving newly laid EASY Joint for at least 4 weeks before cleaning it. When you clean the patio hold the power washer at an angle of about 45⁰ degrees and using a fan spray from no closer than 150mm from the paving joint.
Datasheets:
Technical Datasheet
