Klober Universal Roof Tile Vent and Cap

The Klober Universal Roof Tile vent and Cap is one of the most compatible tile vents on the market, fitting most interlocking concrete roof tiles.

It is suitable for ventilation roof voids where tiles have been used on the roof and is the perfect solution for heat recovery with a 100 mm adaptor.

This particular universal tile vent can be used on any roof that has a 17.5 or higher roof pitch, it has a low-profile design and has been wind tunnel tested to meet British Building Standards.

Klober Universal tile vents are simple and easy to install and provide a 15,000mm ² effective vent area, and are suitable for low and high ventilation of roof voids. These vents are compatible with adaptors and flexi pipe for added soil ventilation and mechanical extraction. The Klober universal tile vent dimensions are 445 mm in Length, 440 mm in Width and 91 mm in Depth.

Features and Benefits:

• Suitable for roof pitches over 17.5 °.
• Simple and easy installation.
• Compatible with most interlocking concrete tiles.
• Compatible with adaptors and flexi pipes.
• Meets British Standards.
• Brand: Klober.
• Colours: Antique Red, Black, Brown, Red and Terracotta.

Buyer's notes:
This universal tile vent is NOT compatible with the following tiles: Redland Delta, Cambrian, Saxon, Richmond, Anchor, Anchor Centurion, Marley Monarch, Clay Pantiles, Landmark Slates and Natural Slate. Klober does offer an alternative for use with Natural Slate

A Klober Universal Roof Tile Vent and Cap Installation Guide is available in the downloads tab.