Installation Guide for Manthorpe G630 Felt Lap Vents

Understanding the Problem: Condensation in Your Roof Space

Condensation in the roof space can lead to a series of issues that every homeowner should be aware of. Damp rafters, wet patches on walls, and water droplets forming beneath the roofing felt can all be signs of a more significant problem. If you’ve noticed any of these symptoms, it's crucial to address them promptly to avoid persistent damp issues that can worsen over time.

Warm air from the living areas below can make its way into the cold loft space through insulation. Without proper ventilation, this warm air accumulates and condenses, leading to the formation of water droplets. These droplets can eventually drip down and cause considerable damage to the roof structure and insulation.

Introducing the Manthorpe G630 Felt Lap Vent

The Manthorpe G630 Felt Lap Vent is a simple yet effective solution to combat condensation in your roof space. Designed to allow airflow through the felt into the batten void, this vent helps mitigate the issues caused by trapped moisture. It features a single-piece design with three fixing clips, making it easy to install and effective in enhancing ventilation.

Installation Steps for the G630 Felt Lap Vent

Installing the G630 Felt Lap Vent is straightforward and can be done without the need for professional help. Below is a step-by-step guide to assist you in the installation process.

What You Will Need

• Manthorpe G630 Felt Lap Vents
• Safety gear (gloves, goggles)
• Basic tools (screwdriver, utility knife)
• Measuring tape

Step-by-Step Installation

1. Prepare Your Roof Space: Ensure that you have clear access to the roof space and that the area is safe to work in. Inspect the rafters and roofing felt for any signs of damage.
2. Identify the Location: Decide where the vents will be installed, typically at the felt laps where the roofing felt overlaps. Aim for a good cross-flow of air by placing vents on both sides of the roof.
3. Install the Vents:
   • Position the G630 vent flat face up with clips facing down.
   • Gently ease the vent into the felt lap, pivoting while pushing down to open the felt lap.
   • Ensure that all three clips securely grip the felt lap.
4. Replicate on the Opposite Side: To ensure effective ventilation, install the same number of vents on the opposite side of the roof.
5. Final Check: Once installed, check that the vents are secure and that there is no obstruction preventing airflow.

The Benefits of Installing Felt Lap Vents

Installing the Manthorpe G630 Felt Lap Vents provides numerous advantages for your roof space:

• Improved Airflow: The vents facilitate the movement of air, allowing warm, moist air to escape and reducing the risk of condensation.
• Cost-Effective Solution: By installing the vents yourself, you save on labour costs while addressing a critical issue in your home.
• Prevent Structural Damage: Reducing moisture buildup helps protect rafters and timbers from rot and decay, prolonging the life of your roof.

Conclusion: A Simple DIY Solution

Addressing condensation in your roof space is essential for maintaining a healthy home environment. The Manthorpe G630 Felt Lap Vent offers an easy-to-install solution that can significantly improve airflow and reduce moisture-related issues. With just a few tools and some basic knowledge, you can effectively enhance your roof's ventilation.

For further technical advice or to explore a full range of roofing solutions, feel free to visit our website.

Watch us install these

Stay Connected

If you have any questions or need assistance, don’t hesitate to reach out. Your roof’s health is important, and we’re here to help!